Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Airbag light
        
(Message started by: Chieftain on Oct 19^th, 2009, 12:57pm)

Title: Airbag light
Post by Chieftain on Oct 19^th, 2009, 12:57pm

This has been the subject of many posts, but I can recall one were it was ststed that the owner had and looked behind the intrument panel and did some soldering which stopped the intermittent air bag light. having looked at an instrument panel i can not see what there is to solder. All I saw was the normal copper tape leading to bulb holder holes. Any suggestions anyone?

Title: Re: Airbag light
Post by Tompion on Oct 19^th, 2009, 3:03pm

I think the suggestion was to solder every joint on the circuit board – strikes me as a bit over the top & likely to cause other problems – I’m fairly sure one of the posters was just talking rubbish.
If I get round to sorting the same problem on mine I’ll trace the circuit from the air bag feed through the circuit board & try to pinpoint the problem.

Dave