|
||
Title: PCB. SATC Module Post by Kenboy on Oct 23rd, 2009, 7:29am HI I am still pursuing this CC problem that has plagued me for some time, It was suggested that the SATC was most likely the problem my question is, Inside the SATC Module there is a Printed Circuit Board, now can the board be tested for its correct function, and if it turns out to be dry soldered joints that have cracked, can they be spotted and repaired (All new to me ). Regards Kenboy |
||
Title: Re: PCB. SATC Module Post by Technology2005 on Oct 23rd, 2009, 7:52am Hi Ken, I can't help with the function of the SATC but when checking for dry joints on laptop motherboards I usually use a USB microscope to get a nice closeup of the joint to see what's really going on. Continuity testing with a probe can only check so much. Repairing a cracked solder joint is relatively easy as long as the solder pads or traces (the copper on the circuit board) haven't lifted or burned with arcing damage. David |
||
Title: Re: PCB. SATC Module Post by Kenboy on Oct 25th, 2009, 9:06am Thanks for that David, much appreciated. Ken |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |