Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> crankshaft bolt?
        
(Message started by: sierra3dr on Nov 1^st, 2009, 6:58pm)

Title: crankshaft bolt?
Post by sierra3dr on Nov 1^st, 2009, 6:58pm

??? I am going the correct way for undoing the 19milly aren't I,anti-clockwise?
thanks

Title: Re: crankshaft bolt?
Post by tootman318 on Nov 1^st, 2009, 7:35pm

yes sir, you are!!! ;D ;D

Title: Re: crankshaft bolt?
Post by sierra3dr on Nov 2^nd, 2009, 6:16am

thanks tootman,d**n thing won't budge ;D

Title: Re: crankshaft bolt?
Post by tootman318 on Nov 2^nd, 2009, 3:55pm

yep, they can be a right pain!! easy if engine out but an **se if not ??? ???

Title: Re: crankshaft bolt?
Post by sierra3dr on Nov 2^nd, 2009, 11:24pm

The engine is out. I have now done it. I'm not too sure if it helped,but I hit the side of the bolt head with a cold chisel,built up a groove and knock it anti-clockwise. And then,on the flywheel facing (block side) there's a row of three holes,and with the use of an angle grinder tool,I used it to chock the flywheel. I can do pictures if anyone is interested.