Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Fuel shut off Loom
        
(Message started by: dxt on Nov 16th, 2009, 10:37am)
Title: Fuel shut off Loom
Post by dxt on Nov 16th, 2009, 10:37am
Without me taking the whole thing off can anyone tell me where the part number is located on the loom. I am having idle problems and stalling etc and have decided to replace the loom. I have replaced just about everything else (idle control valve, MAF etc) but still having problems. The connector onto the control valve is already wrapped in insulating tape and what cables I can see elsewhere are flaking away badly in parts. If anyone has the correct way to remove and replace I would also be most grateful.
Cheers
David
Title: Re: Fuel shut off Loom
Post by Highlander on Nov 16th, 2009, 10:48am
Which engine is it?
Title: Re: Fuel shut off Loom
Post by dxt on Nov 16th, 2009, 3:09pm
Sorry ..... its a 2ltr 1996 saloon.

Cheers
Title: Re: Fuel shut off Loom
Post by dxt on Nov 16th, 2009, 3:24pm
16v
Title: Re: Fuel shut off Loom
Post by Jonnycab on Nov 16th, 2009, 4:15pm
The part number should be on a bit of paper wrapped around the cable shielding at the top part (coils) of the loom.......that's asumming the shielding hasn't all crumbled away  ;)
Title: Re: Fuel shut off Loom
Post by Technology2005 on Nov 16th, 2009, 8:36pm

on 11/16/09 at 10:37:52, dxt wrote:
Without me taking the whole thing off can anyone tell me where the part number is located on the loom. I am having idle problems and stalling etc and have decided to replace the loom. I have replaced just about everything else (idle control valve, MAF etc) but still having problems. The connector onto the control valve is already wrapped in insulating tape and what cables I can see elsewhere are flaking away badly in parts. If anyone has the correct way to remove and replace I would also be most grateful.
Cheers
David


If you're planning on getting a brand new loom then I think all you will need is your 17 digit VIN and Registration number to get the loom from FMD.

If you plan to get secondhand disregard what I said and good luck in finding the part number.

David
Title: Re: Fuel shut off Loom
Post by Jonnycab on Nov 17th, 2009, 1:01am
You can get a new loom from FMD just by giving them your registration, so they can find the right part  :)

Be warned though...you won't much change out of £200  ::)
Title: Re: Fuel shut off Loom
Post by Technology2005 on Nov 17th, 2009, 8:23am
£155.51 on fleabay at the moment, so yes, a tad expensive

David


Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.