Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Gearstick bulb
        
(Message started by: Tekno on Nov 22^nd, 2009, 5:17pm)

Title: Gearstick bulb
Post by Tekno on Nov 22^nd, 2009, 5:17pm

Hello

Can someone take a pic or tell how that T10 bulb should be mounted to automatic gearstick ? I just don't find anything where it fits so it stays at place.

I don't see in dark which position is selected because D,N,R.. aren't illuminated

Title: Re: Gearstick bulb
Post by lleewar on Nov 22^nd, 2009, 8:11pm

Hi Tekno, remove the wood surround and then prise/lift off the gearstick channel. In the corner nearest to you on the drivers side, you will see where the bulb plugs in. In the gearstick channel just underneath there is a white circular hole that the bulb goes into which goes in with a slight twist. That's what I did with mine recently and it's still there. Hope this helps Lee

Title: Re: Gearstick bulb
Post by Simmo on Nov 22^nd, 2009, 8:14pm

This might help (http://www.fordscorpio.co.uk/manual/autotrans/GearSelector.pdf) ;)

Title: Re: Gearstick bulb
Post by Tekno on Nov 22^nd, 2009, 8:31pm

on 11/22/09 at 20:11:04, lleewar wrote:

white circular hole that the bulb goes into which goes in with a slight twist.

It just doesn't go there ??? Bulb holder feels too big. Maybe i'm missing some part ?
Clear photo would help to know how it should look...

Title: Re: Gearstick bulb
Post by Tekno on Jan 16^th, 2010, 4:03pm

any ideas which part im missing? :( I just had to left bulb hanging around loose there.