|
||
Title: Possible matrix problem Post by lleewar on Mar 3rd, 2010, 8:51pm Hi All, is there a cleaning agent that can be used to flush the heater matrix? I think I have a blockage as the temperature seems to be taking ages to get up on the dials and the output seems to have dropped. I also have a curry smell but lo and behold there are no leaks in the usual places. The smell does dissappear after a short burst of air though. i have topped up the header tank so water is going somewhere. Your thoughts would be much appreciated. Lee |
||
Title: Re: Possible matrix problem Post by tonyboy on Mar 3rd, 2010, 10:23pm Have a look at this post JC mentions a curry smell that is something to do with the heater matrix..... http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Advice;action=display;num=1266858520 |
||
Title: Re: Possible matrix problem Post by Simmo on Mar 4th, 2010, 7:00am Have a look at This post (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Advice;action=display;num=1238544915;start=0#0) by Tompion which has a set of photos showing the construction of the Matrix and why flushing is usually ineffective. I have 'locked' this post so the photos are retained. ;) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |