Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> loom labelling
        
(Message started by: c20spit on Jul 27^th, 2010, 9:09pm)

Title: loom labelling
Post by c20spit on Jul 27^th, 2010, 9:09pm

i'm putting the 2.3 petrol in my bedford cf,i've rewired the engine loom managed to re use all the plugs except 2 which i'll replace with new ones . i have removed the loom that goes from the engine loom multiplug to the ecu and fuse box. some of the labels i cant read anymore and most just describe their location on the car as i dont know what they are for. if anyone can help identify any plugs it would be a great help and save me some time going through all the wiring diagrams. if all of this is connected up will the engine run, forget the pats system for the moment, the starter system will be from the original car also.thanks..http://i580.photobucket.com/albums/ss242/c20spit/cfscorpioloominenginebay-1.jpg http://i580.photobucket.com/albums/ss242/c20spit/cfscorpioloomincarunderdash-1.jpg

Title: Re: loom labelling
Post by Tompion on Jul 28^th, 2010, 12:43am

5 possibly unused see no 11
6 Fan relay
8 If 9 is a fan I would imagine 8 is the other fan
11 MAF or there is an unused plug in front of the radiator, possibly this one
13 Octane adjustment
14 Looks about the right place for the oxygen sensor
15 I think that’s for the DPF - part of the exhaust gas recirculation
--------------------------
Just ammended no 11 & added no 5

Title: Re: loom labelling
Post by c20spit on Jul 28^th, 2010, 5:27pm

thanks for the help i'll amend my photo's and add some more when i think i've found the answers, any idea where the green multi plug goes off to? its labelled f and is situated on the passengers footwell a panel area to the left of the glove box. if its just for rear lights or something then i shall not need it to run the engine.

Title: Re: loom labelling
Post by Tompion on Jul 28^th, 2010, 6:29pm

Sorry I can't help with that.
I expect someone who knows will be along.

Title: Re: loom labelling
Post by Mike H on Jul 28^th, 2010, 7:56pm

Could it be this? Scroll down to first photo

http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin;action=display;num=1272975220;start=0