|
||
Title: Mondeo ST200 17" Alloy wheels Post by bonnietiler on Aug 22nd, 2010, 11:04pm Just a thought will these wheels fit? I think the off set is different (ET48) anybody any experience? regards brian |
||
Title: Re: Mondeo ST200 17" Alloy wheels Post by Tons_of_fun on Aug 24th, 2010, 8:02am AFAIK the mondeo (mk2) shares the same PCD & centre bore size as the Scorpio, although there is a slight difference in the offset ( not that you'll notice ) ;-). As for arch clearance ? ? Stick with no more than a 45 profile tyre ( 225 / 45 / 17 are ideal ) & you wont have any rubbage. I had this tyre size on my estate & even with the family & a boot full of luggage i had no scrubbage at all ;-) |
||
Title: Re: Mondeo ST200 17" Alloy wheels Post by tlundkvi on Aug 24th, 2010, 8:09am The original Scorpio rims are ET38 17x7.5J, so at most it will be 10mm closer to the inside than the original 17" alternative, assuming they are the same width. I used Mondeo steels with ET50 on my winter tyres, and this was not a problem at all, but this was 15". |
||
Title: Re: Mondeo ST200 17" Alloy wheels Post by 3drzetec on Sep 6th, 2010, 6:12pm has any body got some of these 17x7.5 wheels can you put a pic up. |
||
Title: Re: Mondeo ST200 17" Alloy wheels Post by Tompion on Sep 6th, 2010, 7:05pm Some of the options are here: http://www.fordscorpio.co.uk/alloyoptions.htm |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |