|
||
Title: RE: ABS/TC Post by michaelelise on Oct 19th, 2010, 4:42pm Hi all I fitted new front suspension, springs and shocks over the weekend. All went well but now I have the dreaded abs/tc lights on from start up and they do not go out. I renewed the unit a couple of months ago as it developed the same fault and all was well until I done the suspension. I have checked the connections and cleaned the cogs by the sensors to no avail. Just wondering if there are any more tips or ideas anyone could come up with. Indecently I had someone change the tyres on the car and that’s when the abs/tc light came on last time. I changed the unit and all was well am I missing something? Does undoing the sensors at the wheel arch do something to the unit? Any ideas welcome. Kind Regards Michael |
||
Title: Re: RE: ABS/TC Post by gozz on Oct 19th, 2010, 4:55pm Have you driven the car since you did the work to allow it to reset ? GOZZ. |
||
Title: Re: ABS/TC Post by michaelelise on Oct 19th, 2010, 5:05pm Hi gozz, Yes I have driven the car about 90 miles since the weekend. |
||
Title: Re: RE: ABS/TC Post by PJDavis on Oct 19th, 2010, 6:37pm Aren't the sensors quite sensitive? So if you had to do any bashing about the suspension, the transfer of force might damage them? |
||
Title: Re: RE: ABS/TC Post by michaelelise on Oct 20th, 2010, 2:23pm Thanks all. It suddenly started to work today. Michael |
||
Title: Re: ABS/TC Post by Mike H on Oct 20th, 2010, 7:48pm It came up before putting 1 or 2 new tyres on increases the diameter of the affected wheels slightly. Ergo, slightly different rotational speeds relative to the other wheels which is interpreted as a ABS sensor fault. (?) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |