|
||
Title: Ultima heater fan Post by Barryb on Dec 1st, 2010, 9:06pm heater fan runs when switched off can't program HBC. Fan stops if WHITE/BLUE & BROWN/BLUE connector removed. Is it the switch? |
||
Title: Re: Ultima heater fan Post by Tompion on Dec 1st, 2010, 9:18pm Check the ribbon cable behind the control panel is latched properly, it can cause this problem. |
||
Title: Re: Ultima heater fan Post by Barryb on Dec 2nd, 2010, 6:59pm Thanks Tompion. Checked ribbon connector today, clips seem secure on connector, did notice a slight indent in the ribbon on right hand side. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |