Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 2.0 V 2.3
        
(Message started by: lesterlad aka Rodders on Jan 3^rd, 2011, 1:17am)

Title: 2.0 V 2.3
Post by lesterlad aka Rodders on Jan 3^rd, 2011, 1:17am

Will the Shut off loom / coils/ ht leads from a 2.0 fit straight onto a 2.3 ?

Title: Re: 2.0 V 2.3
Post by Jonnycab on Jan 3^rd, 2011, 2:53am

Yep ;)...as long as it's a 2.0 16V.

The 2.3 & 2.0 16v share the same coil packs, HT leads & fuel shut off loom :)

Not sure about the 2.0 8v though :-/

Title: Re: 2.0 V 2.3
Post by gozz on Jan 3^rd, 2011, 8:54am

JC.
Might he need to alter the IACV cable ?
GOZZ.

Title: Re: 2.0 V 2.3
Post by lesterlad aka Rodders on Jan 3^rd, 2011, 11:24am

Gozz I have sent you a PM

Title: Re: 2.0 V 2.3
Post by Tompion on Jan 3^rd, 2011, 10:43pm

One of the temp senders only uses 1 wire on the 2.0 so you will need to earth the sensor since it can't earth through the plastic manifold.

Title: Re: 2.0 V 2.3
Post by Jonnycab on Jan 4^th, 2011, 12:58pm

Sorry :-[.....looks like I was wrong ::)

Title: Re: 2.0 V 2.3
Post by Tompion on Jan 4^th, 2011, 3:50pm

;D well it's only minor differences that should be easy to sort

Title: Re: 2.0 V 2.3
Post by Stixy on Jan 4^th, 2011, 10:17pm

The 2.0 loom will fit the 2.3 but as mentioned above the temp sender will need an earth and the air intake sensor plug will need changing as the 2.3 uses a different sensor .

The shutoff loom is an easy job to do if you have a ramp otherwise you will need long skinny bendy arms ;) :)

Title: Re: 2.0 V 2.3
Post by Highlander on Jan 5^th, 2011, 9:18am

on 01/04/11 at 22:17:14, Stixy wrote:

The shutoff loom is an easy job to do if you have a ramp otherwise you will need long skinny bendy arms ;) :)

Yep he has them :)

Title: Re: 2.0 V 2.3
Post by gozz on Jan 5^th, 2011, 9:34am

And legs ;D