|
||
Title: Headlight washers Post by Stes Ultimatum on Jan 13th, 2011, 5:16pm Hi, My washer jet jetted out from the bumper this afternoon! Any tips on how to put it back in without breaking it ! ::) Is there a diagram of how it fits together ? Thanks Steve :-/ |
||
Title: Re: Headlight washers Post by mondeoman on Jan 15th, 2011, 9:59am I've changed the headlight washer on my wife's 2.3 Facelift before. The only way I found to do it was to remove the front bumper carefully placing it on some old sheets to stop marking it etc. You should then have easy access to the screws that fix the washer unit in place. Their are some instructions on this site for fitting an 8 parking sensor kit and that explains who to remove the bumper for a Facelift car, which from the picture you appear to have. Simon |
||
Title: Re: Headlight washers Post by PJDavis on Jan 15th, 2011, 5:37pm I changed my washer by taking out the fog-light cluster. The screws face the wrong way, away from you, but a stumpy screwdriver did the trick. Peter |
||
Title: Re: Headlight washers Post by Stes Ultimatum on Jan 15th, 2011, 6:20pm Cheers Simon & Peter, I'll have a look for the parking sensors pics! But it will have to wait for now as the water pump's gone on the focus. >:( Steve |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |