|
||
Title: Loom pin Differances 2.0 and 2.3 Post by lesterlad aka Rodders on Feb 17th, 2011, 5:20pm As some of you may recall I fitted a loom from a 2.0 16v Ultima to my 2.3 Ghia X and still had problems even after modifying the air intake and temperature gauge sender connections. IE, fans coming on full blast when engine is cold plus erratic running engine when hot then not restarting until cold. I have now purchased the proper loom for my 2.3 Ghia X and the car is running as sweet as a nut. Below are differences between the loom connection pins for a 2.0 16v Ultima and a 2.3 Ghia X http://img837.imageshack.us/img837/5372/loom004.jpg (http://img837.imageshack.us/i/loom004.jpg/) Above........ 2.3 GhiaX Manual with NO Cruise Control or Climate Control Below........2.0 16V ULTIMA Auto http://img412.imageshack.us/img412/7960/loom002.jpg (http://img412.imageshack.us/i/loom002.jpg/) |
||
Title: Re: Loom pin Differances 2.0 and 2.3 Post by Tompion on Feb 18th, 2011, 12:32am The plug on my 2.3 auto has the same pin layout as the one you’ve labelled as for your 2.3 manual. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |