|
||
Title: scorpio 95 v6 AT. Into 1991 sierra Post by Steve_Stelex on Apr 6th, 2011, 8:07pm Hi all, ive got myself another scorpio 95 v6 AT, and want to put the engine into my 1991 sierra shell, but i dont think the gearbox will fit. Does anyone know about this?? and Secondly. Is there any manual gearbox i can fit to the scorpio engine for rwd in the sierra???? that will bolt straight into the sierra tunnell? Any advice would be really appretiated. Regards Steve. |
||
Title: Re: scorpio 95 v6 AT. Into 1991 sierra Post by Highlander on Apr 7th, 2011, 8:27am It can all be done. Does/did your Sierra have a type 9 or MT75? I think you will need some modification to the gearbox mountings and propshaft if you intend to keep the autobox. There were a few manual V6 MT75 boxes made but very rare and very expensive. The usual/cheapest procedure is to mate the bellhousing off a V6 4x4 box (Sierra/Granada) to the rear end of a RWD MT75 box. p.s. This site has a lot more info. http://www.fordpower.org.uk/ |
||
Title: Re: scorpio 95 v6 AT. Into 1991 sierra Post by Stixy on Apr 8th, 2011, 3:07pm If you use a Sierra autobox mount and auto propshaft it will just nut bolt in without modification to a 91 model . Or for a manual look for an XR4i rwd gearbox prop & flywheel |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |