Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Wiring looms 2-3 and 2-9
        
(Message started by: ro284 on Jul 17^th, 2011, 5:42pm)

Title: Wiring looms 2-3 and 2-9
Post by ro284 on Jul 17^th, 2011, 5:42pm

I should prabably say, differences in looms between 2-9 24v and a 2-3 base model! i am scrapping the 24v and wondering what wiring would i would find i require to use the heated seats, in the base 2-3 model, might the 2-3 have the wiring in place? cheers

Title: Re: Wiring looms 2-3 and 2-9
Post by Matt on Jul 17^th, 2011, 5:56pm

Hi mate

Its highly unlikley that the wiring will be there, and its not easy to swal the looms, they run behind the dash and its a dash out job to get to them

Title: Re: Wiring looms 2-3 and 2-9
Post by Scorpio_Mike on Jul 17^th, 2011, 6:24pm

I would have thought the wiring would be there - look for spare plugs under the seat or elsewhere - maybe you would just need to add the sub-loom, possibly also relays and switches ?
I fitted electric windows & central locking in a poverty-spec Sierra many years ago - it was just a case of finding the connectors on the main loom and adding the sub-looms, switches & relays.

Title: Re: Wiring looms 2-3 and 2-9
Post by ro284 on Jul 17^th, 2011, 6:27pm

Thanks guys, the 2-3 does not have the puddle lights either, i will delve deeper tomorow, i may be lucky, power seats too!

Title: Re: Wiring looms 2-3 and 2-9
Post by Snoopy on Jul 18^th, 2011, 7:40am

The heated seat wiring loom is a small loom that starts off under the passenger seat and runs over the tunnel to the other seat. It also derives its power from the cigar lighter socket via a small yellow relay inside the centre consul.

I fitted heated leather seats to my 12v when I had that and all I had to fit was that loom. all the other MAIN wiring loom is usually there.