|
||
Title: rear brake pads Post by micky5 on Dec 9th, 2011, 10:41am Hi, being a novice at any reapirs etc. i was wondering if its easy "ish" to replace rear pads on my 2.3.... as i was quotes 40 quid at local garage, and i can buy pads for around 18 quid and thought i would give it a go thank you in advance Micky |
||
Title: Re: rear brake pads Post by scorpio_man on Dec 9th, 2011, 11:08am hi there http://www.fordscorpio.co.uk/frontrearbrakes.htm hth |
||
Title: Re: rear brake pads Post by micky5 on Dec 9th, 2011, 11:15am thank you scorpio_man, great page, looks easy, thanks again |
||
Title: Re: rear brake pads Post by Simmo on Dec 9th, 2011, 11:58am MIcky. You will need the 'Wind back tool' as the rear pistons cannot be 'pushed' back. The cheapest unit is the cube,usually 3/8 drive, shown On this page (http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=Brake+wind+back+cube&_sacat=See-All-Categories). :) |
||
Title: Re: rear brake pads Post by Matt on Dec 9th, 2011, 12:01pm The rear pads have a little tag on them, itd important that these line up witj the cutouts on the pisron |
||
Title: Re: rear brake pads Post by micky5 on Dec 9th, 2011, 12:11pm ty, i have the wind back tool from ebay already, was gonna do my brakes last time they needed doing , but paid a garage to do em , so this time i will give it a go myself , thanks guys Mick |
||
Title: Re: rear brake pads Post by gozz on Dec 9th, 2011, 8:35pm Both pistons wind in clockwise. GOZZ. |
||
Title: Re: rear brake pads Post by PJDavis on Dec 9th, 2011, 10:35pm Good point Gozz! You'll need to push just a little bit as well, and it'll take a lot more winding than you think. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |