|
||
Title: cam chain problems Post by wes on Mar 1st, 2012, 7:43pm when replacing a head on a 2.3 dohc engine how do you get the chain tensioner to release as i cant get the chain back on the end of the cams thanks |
||
Title: Re: cam chain problems Post by Tompion on Mar 1st, 2012, 8:59pm The manuals are here: http://www.fordscorpio.co.uk/DOHC2-3manual.htm |
||
Title: Re: cam chain problems Post by 5stud on Mar 1st, 2012, 11:06pm you cant use a released one you have to buy a new one never seen just the tensioner uther than from ford about £50 |
||
Title: Re: cam chain problems Post by wes on Mar 2nd, 2012, 10:06am thanks for these reply lads got qouted 90 quid for the tensioner so il bin that 1 :o |
||
Title: Re: cam chain problems Post by Matt on Mar 2nd, 2012, 1:40pm There only a mechanical device working off hydraulics, you can reset them but they need stripping down to do it, they are fiddly though |
||
Title: Re: cam chain problems Post by wes on Mar 2nd, 2012, 7:32pm cheers matt had it apart today and managed to work it out put 2.0 cams in at the same time took the rev balence cams out too sounds loads better will let you all know the differnts sunday |
||
Title: Re: cam chain problems Post by wes on Mar 5th, 2012, 8:26pm well lads 8 laps and it blew a rod thru the block mabey taking the balence cams out wasnt a good idea but we live to learn ;D |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |