Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Wiring for a thermo switch
        
(Message started by: Lazenby43 on May 22^nd, 2012, 7:12pm)

Title: Wiring for a thermo switch
Post by Lazenby43 on May 22^nd, 2012, 7:12pm

Can anyone tell me what the wiring socket with the red blank (as pic) is for please? I assume it's for an accessory like headlight washers which I don't have?
I want to wire a thermo switch for an additional fan and I need a positive plus an ignition.
http://farm9.staticflickr.com/8015/7250388084_730d244344.jpg (http://www.flickr.com/photos/55777341@N00/7250388084/)

http://farm9.staticflickr.com/8159/7250384148_0ccb84cf6e.jpg (http://www.flickr.com/photos/55777341@N00/7250384148/)

Title: Re: Wiring for a thermo switch
Post by Matt on May 22^nd, 2012, 7:28pm

Hi mate

its a diagnostic point for testing the engine bay loom

Have a look at the fatter wires on the fan relay, its a long green on in the engine bay, think its on the off side inner wing but could be wrong on that

Title: Re: Wiring for a thermo switch
Post by Lazenby43 on May 25^th, 2012, 9:18pm

Thanks Matt. I'm wary about taking a feed off the wires to the green relay. Is there anywhere else to take my wires from?