Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Give/Need advice to/from others >> repair rear screen heater,
(Message started by: ro284 on Dec 20th, 2012, 4:33pm)

Title: repair rear screen heater,
Post by ro284 on Dec 20th, 2012, 4:33pm
Hi guys i found the problem with the rear screen heater on my estate, The tags or flat connectors are hanging off both sides, the screen has copper connections bonded to the glass, they were soldered, but not very well, Has anybody soldered them back on again please? i need to clean the mating surfaces, it's the soldering i'm worried about! Will the heat crack the screen? i won't be useing a blowlamp!any advice please, Bob

Title: Re: repair rear screen heater,
Post by Matt on Dec 20th, 2012, 5:21pm
you can get epoxy resin glues that will conduct electricity. not much more expensive then the standard stuff

Title: Re: repair rear screen heater,
Post by Jonnycab on Jan 1st, 2013, 1:17am
I managed to re-solder the connectors back onto the screen on my old estate without too much problem. The screen won't crack, the only real problem is gravity  ;).....good luck  :)



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.