Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Rear Anti-Roll-Bar Links
        
(Message started by: PJDavis on Jan 13^th, 2013, 5:22pm)

Title: Rear Anti-Roll-Bar Links
Post by PJDavis on Jan 13^th, 2013, 5:22pm

How easy/hard are they to fit? I have access to a ramp at work, I see no bolts? I've a couple of new ones on the way, because I've just replaced the Front ones, Again! I thought I'd just buy some rear ones as well.

Peter

Title: Re: Rear Anti-Roll-Bar Links
Post by Matt on Jan 13^th, 2013, 6:03pm

They are harder then they look, they are a nightmare to try and refit without damaging them, lot and lots of washing up liquid/ wd40 etc and something to help you push them over the mushroom ends

Title: Re: Rear Anti-Roll-Bar Links
Post by Scorpio_Mike on Jan 13^th, 2013, 8:36pm

If they are the same style as on a Sierra then Waxoyl and a G clamp did the trick on mine ;)

Title: Re: Rear Anti-Roll-Bar Links
Post by Snoopy on Jan 14^th, 2013, 8:15am

Swarfega works well as a lubricant or even old brake fluid. Brake fluid does NOT affect the rubber so I usually use that for rubber lubricant but do NOT get it on any painted surfaces.

Title: Re: Rear Anti-Roll-Bar Links
Post by PJDavis on Jan 14^th, 2013, 8:36am

I'll maybe have a look and see how tight they are. If they're ok I'll leave them. Thanks for the replies.
Peter