Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Give/Need advice to/from others >> anti roll bar bushes
(Message started by: Bobbit on Jun 15th, 2013, 7:47am)

Title: anti roll bar bushes
Post by Bobbit on Jun 15th, 2013, 7:47am
Hi all ,
Could someone please tell me if it is an easy job for an amateur to fit the above bushes.
And if there are any specific points to look out for.
Cheers Bob

Title: Re: anti roll bar bushes
Post by a900one on Jun 15th, 2013, 5:34pm
I have changed the ones on the front and they are easy to do.

Title: Re: anti roll bar bushes
Post by Simmo on Jun 15th, 2013, 9:08pm
I think item 4 Here (http://www.fordscorpio.co.uk/manual/suspension/FSuspStabiliser.pdf) might help.  If I am correct you may need the caps as well as the actual rubber bushes. The newer bushes do not have a depression in them like the old ones and therefore the 'old' metal caps will not fit. Just have a careful look and check as I had to replace both components, rather than just the rubber bushes, as a result of the design change. :)

Title: Re: anti roll bar bushes
Post by Bobbit on Jun 16th, 2013, 7:31am
Thanks for that guys, Simmo the bushes I have acquired from e bay have the depression for the metal caps, and thanks for the link, big help.
cheers Bob

Title: Re: anti roll bar bushes
Post by Simmo on Jun 16th, 2013, 7:43am
Bob, you should be able to just undo the caps and there will be enough movement to replace the bushes without further work. ;)

Title: Re: anti roll bar bushes
Post by Bobbit on Jun 16th, 2013, 8:15am
Thanks for that Simmo, that's great was not looking forward to taking drop links off.
Cheers Bob

Title: Re: anti roll bar bushes
Post by fieldashley on Jun 16th, 2013, 7:34pm
Hi what was. The item number for these on ebay?? As I need some too.

Kind regards Ashley...

Title: Re: anti roll bar bushes
Post by Tompion on Jun 16th, 2013, 8:46pm
Ashley,

If you want them for a 2.3 your best bet is get them from Ford, you'll likely end up with the wrong size from Ebay (not the same size bar as the 2.0).
This was the part no & price EXC POST & VAT from Fordpartsuk last August:

Scorpio (+)"GB" 2.3L DOHC (145PS) 4 Door Saloon RHD
Front ARB Bushes
Part Number:   7260108(QTY2)
Retail Price:     £5.54each
You Pay:         £4.99each

Title: Re: anti roll bar bushes
Post by Bobbit on Jun 17th, 2013, 8:02am
Ashley,
e bay item number was 360401154843
cheers Bob

Title: Re: anti roll bar bushes
Post by Tompion on Jun 17th, 2013, 11:22am
Ashley,

As your posts say you have a 2.3 I assume that’s what you want them for.

I bought some off ebay & they were for a smaller bar than my 2.3 - I managed to fit them but they were too tight & didn’t last long as they wore through the impregnated lining.

If you want them for a 2.3 you need to cross reference them, I checked various places on the internet & they all said not for 2.3 or didn’t say but had same ref as others that said they didn’t fit – having found the Ford price it was a waste of time looking around.

Dave

Title: Re: anti roll bar bushes
Post by Bobbit on Jun 18th, 2013, 8:02am
Hi Dave,
Will look carefully at the size when they arrive, guy said they were for 2.3, if not thanks for part number.
Cheers
Bob



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.