Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Hot Oxygen sensors
        
(Message started by: Remy43 on Jul 27^th, 2013, 8:21pm)

Title: Hot Oxygen sensors
Post by Remy43 on Jul 27^th, 2013, 8:21pm

Guys,

The pre-cat-sensors and post-cat-sensors of the 24V, are they all the same? I ordered a couple (http://www.ebay.co.uk/itm/LS3485-Bosch-Lambda-Sensor-FORD-Scorpio-II-Estate-2-9-i-24V-10-94-07-98-/380623556614?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item589eee9006) on eBay but i'm not sure where to put them.

I want to replace all 4......

Thnx!

Title: Re: Hot Oxygen sensors
Post by amigafan2003 on Jul 27^th, 2013, 9:37pm

I think they are all the same but just have different length leads.

No problem if they are different - just cut the old connectors off and resolder to the new sensors.

Title: Re: Hot Oxygen sensors
Post by Remy43 on Jul 29^th, 2013, 7:14am

ok great, thnx.

Solder.. So it's kinda hard disconnecting the plugs and reconnect again?

Title: Re: Hot Oxygen sensors
Post by gozz on Jul 29^th, 2013, 8:27am

I think he means soldering to gain length on the leads if they are too short.

Title: Re: Hot Oxygen sensors
Post by Remy43 on Aug 5^th, 2013, 9:13am

lol my bad.. i read it in a different way.

ok, well thnx all :)

Title: Re: Hot Oxygen sensors
Post by Pegasus on Aug 5^th, 2013, 12:18pm

Got to do this as well. How easy is it to change the post cat sensors on a Cossie?

Paul

Title: Re: Hot Oxygen sensors
Post by Remy43 on Aug 5^th, 2013, 3:43pm

very easy if they're not rusted in the exhaust nut..

Title: Re: Hot Oxygen sensors
Post by Pegasus on Aug 5^th, 2013, 6:19pm

Cheers Remy,
have you changed yours? Couldn't quite see where/what the multiplug goes into?

Paul

Title: Re: Hot Oxygen sensors
Post by Remy43 on Aug 5^th, 2013, 9:33pm

connector, put away.. just tilt and pull carefully

:)

cheers m8