Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 24 valve new Handbrake Cable fitted
        
(Message started by: Nunnspoet on Sep 24^th, 2014, 8:34am)

Title: 24 valve new Handbrake Cable fitted
Post by Nunnspoet on Sep 24^th, 2014, 8:34am

My mate fitted A new Handbrake Cable to my Cossie Estate, :) ;D 8) :-*.

He lowered the Exhaust just enough to gain access to the length of the Cable - a little bit fiddily and you need to raise the car enough to allow the Exhaust to drop.

When it came to fitting the new Cable he fitted the front end first.

Now to mounting the ends of the Cable onto the Callipers. With the Cable adjusters fully exteded I hooked up one side and with the help of good Molegrips applied the handbrake as hard a possible to that Calliper and hey presto he was able to slip the Eye of the Cable over the hook on the opposite Calliper. ;D ;D. Yeeehaaa!

Mike

8)