Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> installing insulator bushes
        
(Message started by: scorpioaaron on Jan 17^th, 2015, 9:56pm)

Title: installing insulator bushes
Post by scorpioaaron on Jan 17^th, 2015, 9:56pm

does anyone know how hard/easy it is to fit the insulator bushes on a facelift scorpio?

Title: Re: installing insulator bushes
Post by Tompion on Jan 18^th, 2015, 12:26am

If you mean on the rear suspension details are here:
http://www.fordscorpio.co.uk/manual/rearaxle/RSuspInsulator.pdf

I managed it without the extractor or longer bolt.
The ones I’ve seen on ebay & elsewhere aren’t the same as were on my 2.3 saloon.

Are yours noticeably worn, it made no difference on mine as far as I could tell.

If it’s at the rear but not that have a look here:
http://www.fordscorpio.co.uk/transgen.htm

Title: Re: installing insulator bushes
Post by scorpioaaron on Jan 18^th, 2015, 7:57pm

Sorry it's on the front wishbone

Title: Re: installing insulator bushes
Post by Andycan on Jan 18^th, 2015, 8:17pm

Is this any good?

http://www.fordscorpio.co.uk/wishbone.htm

Title: Re: installing insulator bushes
Post by Andycan on Jan 18^th, 2015, 8:18pm

With this
http://www.fordscorpio.co.uk/manual/suspension/FSuspLowerArm.pdf

Title: Re: installing insulator bushes
Post by scorpioaaron on Jan 19^th, 2015, 2:56pm

Awesome. Thank you.