|
||
Title: 24 Valve Cosworth Rad. Thermal Switch? Post by Nunnspoet on Nov 7th, 2016, 9:59am Can somebody please tell me where exactly the above Switch is located and how do I extract it? Mike :) |
||
Title: Re: 24 Valve Cosworth Rad. Thermal Switch? Post by Simmo on Nov 7th, 2016, 11:44am Mike, if you read This page (http://www.fordscorpio.co.uk/manual/cooling/Radiator.pdf) there is no mention of such a switch. I have no personal knowledge of the Cosworth BUT I understand that the temperature on these cars is controlled by the ECU. On the 2.0ltr there is a sensor on the block which provides the information. Hopefully a Cosworth 'buff' will be along to help. ;) |
||
Title: Re: 24 Valve Cosworth Rad. Thermal Switch? Post by Tompion on Nov 7th, 2016, 12:50pm Hi Mike, Afraid I'm not a Cosworth buff, assuming it's the control of the fans you're interested in I imagine it's the engine temperature sensor. The location of the ECT is shown at the bottom of the page here: http://www.fordscorpio.co.uk/24vcomponents.htm or look here under Engine Management - Cosworth 24V: http://www.fordscorpio.co.uk/emmanuals.htm The temp gauge sender is here under instruments: http://www.fordscorpio.co.uk/intbasicelec.htm Dave |
||
Title: Re: 24 Valve Cosworth Rad. Thermal Switch?ves the Post by Glyn on Nov 7th, 2016, 7:51pm The fans are indeed controlled by the ECU. There is no thermal switch on the Cosworth. The ECU gains its information from the temp sensor on the block not the one at the front near the top- this has a single wire and only serves the temp gauge. By contrast the diesel and the 2.9i "Cologne" engines do have a thermal switch for the fans as they do not have the EECV , but have the EECIV which can't control the fans. |
||
Title: Re: 24 Valve Cosworth Rad. Thermal Switch? Post by Simmo on Nov 7th, 2016, 9:09pm Thank you Glynn. :) |
||
Title: Re: 24 Valve Cosworth Rad. Thermal Switch? Post by Nunnspoet on Nov 8th, 2016, 8:45am Many thanks everyone. 8) Head scratching is over, problem solved Mike :) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |