|
||
Title: changing drivers seat from electrical to manual Post by ren on Oct 16th, 2017, 4:24pm anyone know if its possible to convert the electric drivers seat, to a manual, also putting a winding wheel, to adjust back rest seat position, |
||
Title: Re: changing drivers seat from electrical to manua Post by Snoopy on Oct 17th, 2017, 7:18am Yes you just need to get hold of a manual seat. Its easy to swap seats over. Most people go the other way Manual to electric! |
||
Title: Re: changing drivers seat from electrical to manua Post by ren on Oct 17th, 2017, 5:05pm want to convert electric seat into manual, does anyone know if it's possible to get the wheel to allow the backrest to fully recline |
||
Title: Re: changing drivers seat from electrical to manua Post by Scorpio_Mike on Oct 17th, 2017, 6:17pm I would have thought the seat frame assembly for manual & electric adjustment are very different. You should be able to get the backrest to fully recline with electric adjustment. |
||
Title: Re: changing drivers seat from electrical to manua Post by ren on Oct 17th, 2017, 6:45pm the motors are not working, this is an old one I had to replace, I now want to use it in a non electric capacity, all the base and sliders have been taken off and stripped down, just left with the seat now, as any one got a diagram showing wiring to the seat, and how the seat functions, I cannot remember,were the motor for the backrest is, th |
||
Title: Re: changing drivers seat from electrical to manua Post by ren on Oct 22nd, 2017, 6:38pm the motor in the seat which operated the backrest, and the lumbar control still work, so have wired them in so have electrical operated recline now, may also be able to get heated seats, now ive got power to the seat. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |