Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> 24 valve Ignition leads
        
(Message started by: Nunnspoet on May 10^th, 2019, 1:39pm)

Title: 24 valve Ignition leads
Post by Nunnspoet on May 10^th, 2019, 1:39pm

Hi everyone
where on here can I find the Ignition Leads to the Coil Pack information.

Best regards

Mike :)

Title: Re: 24 valve Ignition leads
Post by Simmo on May 10^th, 2019, 2:05pm

I'm not sure what you want precisely Mike. Is Photo 15 here (http://www.fordscorpio.co.uk/manual/engines/dohc16v/DOHC16VCHead.pdf) any use. It shows the position of the coil packs and their connections. Or do you want a wiring diagram??

Title: Re: 24 valve Ignition leads
Post by Nunnspoet on May 10^th, 2019, 2:14pm

Hi Simmo.
I have installed a new Coil pack on my 24 valve Cossie Estate. I mixed up the spark plug leads and I don't know which spark plug lead goes into what plug hole on the Coil Pack. I have a sore backside from kicking myself.
So I would be very happy to see a diagram of what goes where, please

Title: Re: 24 valve Ignition leads
Post by Simmo on May 10^th, 2019, 3:35pm

Try this and look at page 4 (https://onedrive.live.com/?cid=EB36F845EA9B8FB6&id=EB36F845EA9B8FB6%21813&parId=EB36F845EA9B8FB6%21146&o=OneUp)
I'm not familiar with the Cosworth but looking at the diagram it seems that coil one feeds plugs 1 and 5, coil two feeds 3 and 4 and coil 3 feeds 2 and 6. That's how I read it.

Title: Re: 24 valve Ignition leads
Post by Nunnspoet on May 10^th, 2019, 7:54pm

Thank you very much Simmo, but the info you reference is not my Cosworth Engine. Mine is the 2.9 v6 24 valve Cosworth and has the big inlet spider. I should have been more specific in the first place, sorry Simmo.

Coil Pack: 000 plugs: 123
000 plugs: 456

If you can make sense of the above
::) I need to know which plug lead from each spark plugs goes into which 0 in the Coil Pack.

Title: Re: 24 valve Ignition leads
Post by Nunnspoet on May 10^th, 2019, 7:58pm

Agh. It should look like this:

Coil Pack: 000 plugs 123
000 plugs 456

Title: Re: 24 valve Ignition leads
Post by Nunnspoet on May 10^th, 2019, 8:02pm

uugh! the Coil Pack 0's are in a block of 6 and are adjacent to each other. I could not get the 0's to line up vertically.

Title: Re: 24 valve Ignition leads
Post by Tompion on May 10^th, 2019, 11:02pm

I believe it should be:

000
000

123
564

Dave

Title: Re: 24 valve Ignition leads
Post by Nunnspoet on May 11^th, 2019, 1:28pm

Brilliant Dave. That did the trick, than you very much.

My very best regard to both of you.

Mike 8)