Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Exhaust to downpipe gasket
        
(Message started by: waxdaddy on Jun 7^th, 2019, 9:25pm)

Title: Exhaust to downpipe gasket
Post by waxdaddy on Jun 7^th, 2019, 9:25pm

Can anybody tell me where to get a pair of exhaust to downpipe gaskets? They don't seem to look like any other generic gasket? anybody got a part number?

Title: Re: Exhaust to downpipe gasket
Post by waxdaddy on Jun 7^th, 2019, 9:26pm

Sorry should have said for a 24v engine!

Title: Re: Exhaust to downpipe gasket
Post by Tompion on Jun 7^th, 2019, 11:02pm

Assuming you mean cat to manifold, too late for this listing but it gives the part no's as 7012906 (or 95GB 9451 BA) click on the "See original listing" & you'll see pictures of fitment location:
https://www.ebay.co.uk/itm/232992922150

If you look at this listing for an aftermaket cat you'll see it says fitting kit FK90285A or FK90285B required, search for those numbers & you'll find them - presumably they can be used on original or pattern parts but I don't know:
https://www.ebay.co.uk/itm/292803413921

Title: Re: Exhaust to downpipe gasket
Post by waxdaddy on Jun 10^th, 2019, 3:57pm

Thanks! Least I've got a part number now. Unfortunately Ford no longer have them.

Not sure what my alternatives are now :-/

Title: Re: Exhaust to downpipe gasket
Post by Scorpio_Mike on Jun 10^th, 2019, 4:21pm

Look for some heat resistant or high temperature gasket material which you can buy by the sheet and then make one using the old one as a pattern.

Title: Re: Exhaust to downpipe gasket
Post by Tompion on Jun 10^th, 2019, 4:57pm

You could contact one of the sellers of the BM cats and ask if the fitting kit is OK with a Ford cat (assuming you have an original).
Here's one of the kits on Ebay:
https://www.ebay.co.uk/itm/292802784828

Says for illustration only so the picture may not be right.