Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Give/Need advice to/from others >> Door trim fixings
        
(Message started by: QuentinG on Jul 22^nd, 2019, 5:28pm)

Title: Door trim fixings
Post by QuentinG on Jul 22^nd, 2019, 5:28pm

Just recently I had some useful advice on here for obtaining sill weatherstrip fixings, unfortunately it was after I had paid Ford's prices, so now I am asking advice about a couple more parts.
I need the fixing for the front of the door bin to or through the door trim that is behind the seat memory switch, and I also need the fixings for the door trim itself to the frame at the top and rear of the door, I wondered if you can point me in the right direction.
As I use the car more I am finding more of Herbert the welder's bodges and breakages, hopefully I am near the end now.

Title: Re: Door trim fixings
Post by Tompion on Jul 25^th, 2019, 1:21am

Not sure what you mean, what numbers on this picture:

http://i.imgur.com/ywnippM.jpg

Incidentally the washers shown as 25 go between the pocket & the door card. They are large diameter thin usually black steel & often missing. If not there it's quite likely the screws will break through the pocket.

Title: Re: Door trim fixings
Post by QuentinG on Aug 6^th, 2019, 10:10pm

Thanks very much for the diagram and the info, will be useful next time it goes in the garage and we can work out what is needed.