|
||
Title: 2.9 12v loom Post by Glyn on Sep 9th, 2020, 1:48am Sadly my 2.9 12v ultima has died due to disintigration of the main loom in the engine bay (all the insulation has powdered) I will search for a replacement or to get one made up somehow but the part number on the label is not recognised anywhere. Can anyone help? The label reads :- 95GG 2CO11 BDD EE00-E-10 453521 000 B 110 105 8801 as far as I can tell. Any help greatly appreciated. |
||
Title: Re: 2.9 12v loom Post by Simmo on Sep 9th, 2020, 8:01am If you have to get one made up This article may help (http://www.fordscorpio.co.uk/12vlooms.htm) Good luck. |
||
Title: Re: 2.9 12v loom Post by Glyn on Sep 9th, 2020, 3:20pm Thanks Simmo I have been given a finis code 1041417 by a Ford dealer. |
||
Title: Re: 2.9 12v loom Post by Tompion on Sep 9th, 2020, 4:36pm My search of that finis code shows it as an ABS loom. Was the finis based on the label details you gave? Which loom do you mean - the one from the block connector on the wing to the engine or the one that runs from the block connectors round the front of the car & into the big grommet below the battery. If it's the one that runs round the front, the label on my 2.3 I think was on the wire behind the battery that goes to the alarm sounder. |
||
Title: Re: 2.9 12v loom Post by Tompion on Sep 9th, 2020, 4:50pm The reason you get no search results from the label is it should be a zero (not o) 95GG 2C011 BDD Not that you get anything much with that :( |
||
Title: Re: 2.9 12v loom Post by Glyn on Sep 10th, 2020, 1:06am Apologies for the oh instead of the zero. I had been searching with a zero but made the mistake on the post. The finis code was given to my garage by a ford dealer just going off the 95GG 2C011BDD and was apparently listed as wiring harness. Naturally no longer available but last listed price about £500. Thanks Tompion |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |