Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> OBD Advice >> OBD SCAN ERROR CODE P1270
(Message started by: trebor on Jan 18th, 2006, 9:57pm)

Title: OBD SCAN ERROR CODE P1270
Post by trebor on Jan 18th, 2006, 9:57pm
Can anyone tell me what to do about error code 1270.
scorpio ultima 2.3  16v   1999
thanks bob

Title: Re: OBD SCAN ERROR CODE P1270
Post by scorpio_man on Jan 18th, 2006, 10:15pm
hi there

is it a manual? looks like you/ previous owner has been giving it some! ;) ;D

P1270 Engine RPM or Vehicle Speed Limiter Reached

hth


Title: Re: OBD SCAN ERROR CODE P1270
Post by trebor on Jan 18th, 2006, 11:24pm
yes it is a manual.
i  will be buying it on sataday.
i did an obd scan and found 1270 fault code.
i must have started it up more than 3 times and this fault was still there.
could you tell me if it will clear
or if i should have cleared it , and it woiuldnt have come back ?

Title: Re: OBD SCAN ERROR CODE P1270
Post by scorpio_man on Jan 19th, 2006, 7:39am
hi there

yes, clear the code at the start of the test drive. see if it returns afterwards. should be ok.

sounds like it 'red lined' in 1st gear :-/ as long as you don't do that as a regular thing, it should be fine.

max power is at 5600rpm and max torque at 4500rpm, so you're heading down hill at that rpm :(

Title: Re: OBD SCAN ERROR CODE P1270
Post by trebor on Jan 19th, 2006, 7:21pm

i thinks the boys who are selling me the car had been playing with it.
part exchanging my my 97 cossie for a 1999 2.3 i didnt give it a thrashing on my test drive.(pointless)
will do as you say reset and take for another test drive.


thanks for your help scorp man ++++++++

bob



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.