Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> CODE advice please
        
(Message started by: - Mike - on Mar 18^th, 2006, 8:24pm)

Title: CODE advice please
Post by - Mike - on Mar 18^th, 2006, 8:24pm

Good evening all

Just a quick question if I may.
Had some time ago 2 codes appear P0138 & P0158 - o2 sensors banks 1 & 2 position 2 voltage high. Have now replaced both sensors today and have after clearing all the codes 1 has returned. I am still unsure as to what I am doing/reading the software so can anyone please advice me as to what I may check next to solve the problem.

Thanks

Mike

Title: Re: Advice please
Post by - Mike - on Mar 20^th, 2006, 5:21pm

Have decided to change the NEW air flow meter for the old one as an experiment. Shall clear the codes and try again. Hopefully nothing will appear and if so its back to Ford for replacement under warranty.

Title: Re: Advice please
Post by - Mike - on Mar 21^st, 2006, 5:34pm

Well tried the air flow and no such luck. Code re-appeared its head after approx 20 mins. The good news is the other side side hasn't :)

Strange thing is when looking at the codes originally after clearing them there was none pending but when you look in the enhanced codes there it was along with for most of the time P1000 although at one pont this did actually disappear ???

Any suggestions please ;)

Thanks

Mike