Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> OBD Advice >> Code P1151 on a 24V
(Message started by: Pegasus on Sep 24th, 2006, 5:40pm)

Title: Code P1151 on a 24V
Post by Pegasus on Sep 24th, 2006, 5:40pm
Hi,
just done a scan for hiacekim's 24V at the Kent meet today:

Got Code P1151 and scan shows upstream cat sensor on bank 2 is flat. Enhanced also gives the result of sensor failure detected (O2S21-FL).
The obvious is replace sensor or is there something simpler that can be done?

Also, LTFTs ~-14%, STFT on bank 2 goes up to 32% (lean) :o

Bank 1 cat, MAF, TPS, etc look fine.

Zipped file available if anyone wants to see it

Cheers

Paul

Title: Re: Code P1151 on a 24V
Post by hiacekim on Sep 24th, 2006, 7:35pm
Hi Paul,
      Once again thank you for your interest and help today, very much appreciated.
      I hope one of the  members can help tie this down , so i can get her running smoothly,
                                Cheers Kim .  :)  
     

Title: Re: Code P1151 on a 24V
Post by scorpio_man on Sep 24th, 2006, 9:06pm
hi there

the ltft might be down to the fuel pressure regulator.

see this (http://www.fordscorpio.co.uk/fuelreg.htm)

Title: Re: Code P1151 on a 24V
Post by hiacekim on Nov 7th, 2006, 8:47pm
Hi paul ......it was the lambda sensor, just as you said .Now fixed.... total change to cruising ....all jerkyness gone and MOT showed ..CO 0.123.... HC 55 ...LAMBDA 0.999
on the fast idle test and CO 0.014 on natural idle test  ...cheers kim   :)

Title: Re: Code P1151 on a 24V
Post by Pegasus on Nov 9th, 2006, 9:49pm
Hi Kim,
glad you got it sorted  :)

Sad to see you're selling it though  :(

All the best

Paul



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.