Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> OBD Advice >> Scorpio 95' 2L 16V not OBD-II compliant ?
(Message started by: kanor on Mar 1st, 2007, 10:24pm)

Title: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by kanor on Mar 1st, 2007, 10:24pm
For approx a year now I have tried to solve a slight missfire on my Scorpio 95'. For this reason I first baught OBD2 kable from www.obd-2.com and also an ElmScan5 but none of them was able to connect to my car. So I then vent to a local Ford dealer and had the car scanned there. They told me that my car was equiped with a EEC-V without ODB-II. It was more like a EEC-V with a EEC-IV inside ???

I think this is rather hard to beleive so i wonder if somebody on this forum knows if this is right ?

Sticer on my EEC-V says:
95GB-12A650-BB and also has big letters  WILD  printed along with EEC-V and a barcode.


Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by Simmo on Mar 2nd, 2007, 7:02am
THIS page (http://www.fordscorpio.co.uk/obdfaq.htm) deals with problems like this. Are you sure it is not a 12v? as this is a known and documented issue?.

Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by kanor on Mar 2nd, 2007, 11:22am
Hi, thanks for reply :).
I'm 100% sure it is a 2litre 16valve installed in my car. I have also checked that pins in the DLC are in plase and messaured GND +12v and data-lines are ok.

While googling around internet I found this:
http://www.fordforums.com/showthread.php?t=91662&page=3

It says that som US Fords are equiped with a "B@stard EECV" :-/. Since mine is a Norwegian model perhaps it also has a "B@stard EECV" ? Is it possible to see this out of the part# 95GB-12A650-BB ?


Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by pinto on Mar 3rd, 2007, 9:28am
Ford do this sometimes  - my brother had a Mondeo 2.0 that was sent for diagnostic testing at the local dealers and was discovered to have some weird setup - it took the mechanic 40 minutes to find the diagnostic socket, which wasnt where it should have been, and it wasnt the right socket for the model either...

Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by Highlander on Mar 3rd, 2007, 12:53pm
Kanor are you sure yours is the 95-98 Scorpio? same bodyshape as the one in the picture on top left of this page?

The 85-94 Granada here in the UK was called the Scorpio in Europe.

Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by kanor on Mar 3rd, 2007, 9:20pm
Hi again.

Yes it's right that in Norway the Scorpio-name was used from 85' when the Granada-name was replaced, but my Scorpio is this new version with the "frog-eyes" that this site is all about. It was sold as new in late 95' here in Norway.
(By the way; Thanks to the guys who has used so mutch energy to build this fantastic site :) :) ..)


Title: Re: Scorpio 95' 2L 16V not OBD-II compliant ?
Post by scamp on Mar 29th, 2007, 8:07pm

on 03/03/07 at 09:28:35, pinto wrote:
Ford do this sometimes  - my brother had a Mondeo 2.0 that was sent for diagnostic testing at the local dealers and was discovered to have some weird setup - it took the mechanic 40 minutes to find the diagnostic socket, which wasnt where it should have been, and it wasnt the right socket for the model either...

yea that was a problem with some of the earlier mondeos they had no 16 pin connection instead a 3 pin plug up behind the glove box just under the top of the dash.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.