Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> Problems connecting. Failing loom?
        
(Message started by: Kjetil S on Aug 15^th, 2007, 2:05pm)

Title: Problems connecting. Failing loom?
Post by Kjetil S on Aug 15^th, 2007, 2:05pm

I just tried doing a scan on my 2.0 16v with my tricom cable, and it doesn't seem to connect. It seems like it connects to the tricom adapter just fine, but the car won't respond at all.

Here's the log:

Quote:

Wed 15 Aug 2007 version 1.52
12:54:53.3 - initializing serial port
12:54:53.3 - connected rs232 port 1
12:54:53.3 - Initializing vehicle using Trican, Tricom, Indo Router
12:54:53.4 - Log In #1 SAE J1850 VPW @ 120
12:54:56.4 - timeout 5 mode= $01
12:54:56.4 - no response
12:54:56.4 - Log In #1 SAE J1850 PWM @ 120
12:54:59.4 - timeout 5 mode= $01
12:54:59.4 - no response
12:54:59.4 - Login #1 ISO 9141-2 @ 120 10 25
12:54:59.4 - Login #1 ISO/DIS KWP2000-4 slow @ 120 10 25
12:54:59.4 - Login #1 ISO/DIS KWP2000-4 fast @ 120 10 25
12:55:19.9 - timeout 5 mode= $01
12:55:19.9 - no response
12:55:40.4 - timeout 5 mode= $01
12:55:40.4 - no response
12:55:43.4 - timeout 5 mode= $81
12:55:43.4 - no response
12:55:43.4 - Login #1 ISO 9141-2 @ 120 10 25
12:55:43.4 - Login #1 ISO/DIS KWP2000-4 slow @ 120 10 25
12:55:43.4 - Login #1 ISO/DIS KWP2000-4 fast @ 120 10 25
12:56:03.9 - timeout 5 mode= $01
12:56:03.9 - no response
12:56:24.5 - timeout 5 mode= $01
12:56:24.5 - no response
12:56:27.5 - timeout 5 mode= $81
12:56:27.5 - no response
12:56:29.5 - Log In #2 SAE J1850 VPW @ 120
12:56:32.5 - timeout 5 mode= $01
12:56:32.5 - no response
12:56:32.5 - Log In #2 SAE J1850 PWM @ 120
12:56:35.5 - timeout 5 mode= $01
12:56:35.5 - no response
12:56:35.5 - Login #2 ISO 9141-2 @ 120 10 25
12:56:35.5 - Login #2 ISO/DIS KWP2000-4 slow @ 120 10 25
12:56:35.5 - Login #2 ISO/DIS KWP2000-4 fast @ 120 10 25
12:56:56.0 - timeout 5 mode= $01
12:56:56.0 - no response
12:57:16.5 - timeout 5 mode= $01
12:57:16.5 - no response
12:57:19.5 - timeout 5 mode= $81
12:57:19.5 - no response
12:57:19.5 - Login #2 ISO 9141-2 @ 120 10 25
12:57:19.5 - Login #2 ISO/DIS KWP2000-4 slow @ 120 10 25
12:57:19.5 - Login #2 ISO/DIS KWP2000-4 fast @ 120 10 25
12:57:40.0 - timeout 5 mode= $01
12:57:40.0 - no response
12:58:00.6 - timeout 5 mode= $01
12:58:00.6 - no response
12:58:03.7 - timeout 5 mode= $81
12:58:03.7 - no response
12:58:05.6 - Log In #3 SAE J1850 VPW @ 120
12:58:08.7 - timeout 5 mode= $01
12:58:08.7 - no response
12:58:08.7 - Log In #3 SAE J1850 PWM @ 120
12:58:11.7 - timeout 5 mode= $01
12:58:11.7 - no response
12:58:11.7 - Login #3 ISO 9141-2 @ 120 10 25
12:58:11.7 - Login #3 ISO/DIS KWP2000-4 slow @ 120 10 25
12:58:11.7 - Login #3 ISO/DIS KWP2000-4 fast @ 120 10 25
12:58:32.2 - saved 0 messages 2 KB to :
C:\NOCONECT
manufacturer files:
Core
Not Defined
none

Any tips? Usual places for the loom to fail?

Title: Re: Problems connecting. Failing loom?
Post by scorpio_man on Aug 16^th, 2007, 6:37am

I am assuming you have the tricom cable with the box that plugs into the obd socket? the basic pwm/iso cable didnt work for me.

Can sense your frustration with this ..it drove me nuts; software is not friendly and is buggy.

go to options/gateway

filters page tick all boxes
protocol page tick all boxes except..send mode/initiate mode/CAN/default (sae ISO) ....speed set to 120

interface page both ports must be the same and tick the tricom interface nothing else ticked

hi there

try these settings.....

btw, sent you an email. ;)

hth

Title: Re: Problems connecting. Failing loom?
Post by Kjetil S on Aug 16^th, 2007, 11:29am

Thanks, I'll try and see what happens

Thanks for your help

Title: Re: Problems connecting. Failing loom?
Post by Kjetil S on Aug 16^th, 2007, 1:13pm

No workies :(

I recieved some more advice here (http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1187205629;start=) (sorry for double posting)
Should perhaps continue the discussion in the other thread.