Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> abs codes
        
(Message started by: vanman on Jan 19^th, 2008, 4:37pm)

Title: abs codes
Post by vanman on Jan 19^th, 2008, 4:37pm

Does anyone know if it is possible to clear abs faults using VE ,I ask because i work on VW"s and certain models use Teves abs,when these develop faults,the fault will remain in fault memory untill cleared using diag equipment?

Title: Re: abs codes
Post by scorpio_man on Jan 19^th, 2008, 4:46pm

hi there

yes when using the iso (combo) cable.

hth

Title: Re: abs codes
Post by vanman on Jan 20^th, 2008, 2:39pm

Ive got the combo lead and can actually read off the codes ,but cannot find any way of clearing faults in abs.

Title: Re: abs codes
Post by scorpio_man on Jan 20^th, 2008, 2:50pm

hi there

you need to clear it in enhanced mode.

hth

Title: Re: abs codes
Post by vanman on Jan 20^th, 2008, 8:07pm

Thanks i will try that

Title: Re: abs codes
Post by vanman on Jan 20^th, 2008, 8:13pm

Sorry i am being a bit thick here,what is enhanced mode and where do i find it?

Title: Re: abs codes
Post by scorpio_man on Jan 20^th, 2008, 8:36pm

hi there

click on the status tab then go into enhance (just above and to the right).

bring up the abs tab and then clear it.

hth

Title: Re: abs codes
Post by vanman on Jan 20^th, 2008, 8:44pm

Thanks, understand now