Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> EEC-IV test and results
        
(Message started by: Geoff_W on Jun 13^th, 2008, 9:59pm)

Title: EEC-IV test and results
Post by Geoff_W on Jun 13^th, 2008, 9:59pm

I have just used the Project tester for the first time on my 12valve and got the following codes

1 Slow Code 10

2 Slow Code 10

3 Fast Code 76

4 FAST KAM 10

5 FAST KAM 11

6 Slow Code 76

7 Slow Code 61

8 Slow KAM 30

Which was nice

Has anybody got access to the codes and can give me a commentary?

Title: Re: EEC-IV test and results
Post by scorpio_man on Jun 13^th, 2008, 10:14pm

hi there

i found this on grahams site.... http://homepage.ntlworld.com/a.harby2/The_Fault_code_reader_v1_C.pdf

Title: Re: EEC-IV test and results
Post by Geoff_W on Jun 13^th, 2008, 10:47pm

Thanks Andrew,

Great for running the tests but does not appear to identify codes.

I will bring my tester to Harewood and will try to track down appropriate codes.

Title: Re: EEC-IV test and results
Post by Tompion on Jun 14^th, 2008, 3:59am

Hopefully someone who knows will be along, but looking through the Haynes fault codes manual for Ford EEC IV “enhanced” two digit codes (2.4/2.9 V6 cat & 1.8CFi).
Possibly:
10 Command code/seperator code for KAM
10 operator action required as follows:
Engine running: Load engine by blipping the throttle. The engine speed must exceed 2500rpm (possibly may generate a code if action not taken)
11 No fault (also see screenshot here: http://homepage.ntlworld.com/a.harby2/ggpfcr02.html (although different engine))
30 Marker code - identifies ECM for 6 cylinders
61 Coolant temp sensor circuit voltage too low
76 Unused (although the “basic” codes for the 2.8 show it as brake on)

Looking through Grahams FCR program 76 may be:
Insufficient VAF change during dynamic response test

Dave