Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> Gateway
        
(Message started by: Tompion on Aug 8^th, 2008, 5:10pm)

Title: Gateway
Post by Tompion on Aug 8^th, 2008, 5:10pm

I have been trying various settings in the Gateway of the OBD-2 software using my tricom lead & thought I’d post some of the settings that improve my setup:

Not ticking interface/direct ISO makes the ABS connection quicker.
Not ticking Protocol/Manufac. Enhanced login means under the data tab the list is already there (don’t have to send for supported data).**

If you have a stable set up try the following:
In Protocol try reducing Ford PMW as much as possible. I have set mine to 1 and the refresh when retrieving data from several sources is much much better & it doesn’t seem to cause any dropped connections. As an example of the difference, time taken to download the enhanced list:

Ford PMW set to 120
156 of 1965 possible, 2minutes 25seconds

Ford PMW set to 1
156 of 1965 possible, 40seconds

--------------------------------

**Not ticking Protocol/Manufac. Enhanced login – I find ver1.55 works if I don’t tick this, but it has problems with the ABS

Title: Re: Gateway
Post by Daven on Aug 8^th, 2008, 9:13pm

This is useful info Dave - maybe it could be made a sticky? Where's Simmo ;)

Dave

Title: Re: Gateway
Post by Simmo on Aug 8^th, 2008, 9:38pm

Done. ;D

Title: Re: Gateway
Post by Snoopy on Aug 9^th, 2008, 8:07pm

POWER MAD ;D ;D I knew he would do a good job!
saves me hours ..... Thanks Mike !
decorating all done is it ??????

Title: Re: Gateway
Post by Simmo on Aug 9^th, 2008, 8:42pm

Thanks Dave..... I wish !!. Got Lynn on the sander and the undercoat though!!. ;D