Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> OBD Advice >> Reader for EECIV
        
(Message started by: Glyn on Feb 17^th, 2013, 7:48pm)

Title: Reader for EECIV
Post by Glyn on Feb 17^th, 2013, 7:48pm

Does anyone know if the Gunsen 77032 would be suitable for my '95 2.9 12v ?
It only lists the granada scorpio 2.9 12v with EECIV + but says suitable for fords up to '98 if eecu is compatible. What type of plug should it have for the OBD?

Title: Re: Reader for EECIV
Post by Snoopy on Feb 18^th, 2013, 8:23am

It should have the type of plug as shown in the PAGES (http://www.fordscorpio.co.uk/star.htm) on the main site. there is a wealth f information on there about codes etc.

Title: Re: Reader for EECIV
Post by Glyn on Feb 18^th, 2013, 4:25pm

Thanks Snoopy. It appears to have a 3 pin triangular plug + battery feed + separate ABS connector. Does the Alex Peper tricom setup do the EECIV as well as the OBD2?
Glyn