Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Off Topic Subjects >> Unpacking zipped files
        
(Message started by: jimgrant on Oct 4^th, 2004, 4:02pm)

Title: Unpacking zipped files
Post by jimgrant on Oct 4^th, 2004, 4:02pm

Can anyone remember the procedure for unpacking the 3 zip files mentioned recently?

Title: Re: Unpacking zipped files
Post by philgood on Oct 4^th, 2004, 10:22pm

I think that below are the instructions you were after but I still haven't done it myself yet.

What you need to do is download the three zip files:
Part1.zip (63.8Mb)
Part2.zip (51.2Mb)
Part3.zip (181.7Mb)
Unzip them all to the same directory and copy the contents to a CD and call it ISEN9806.
Then just run the install(.exe) program which will set up a program group for the "Technical Information System" and away you go.
To install the Service Checksheet generator go to the directory on the CD called "disk1" and double click on setup(.exe)
Good Luck and if you have problems check the following points:
1. The contents of the CD should match this figure: image (On "My computer" do edit / select all, file / properties)
2. If not check that the zip files match these figures: part1, part2 & part3

Title: Re: Unpacking zipped files
Post by jimgrant on Oct 5^th, 2004, 10:03am

Cheers Phil I'll give that a try.

Title: Re: Unpacking zipped files
Post by David_South_West on Oct 6^th, 2004, 7:56am

Down loaded two files now can't log on to site to download third.Any one know what's happened?
If the site has disapeared for good any one want to sell a copy of the cd?