Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Off Topic Subjects >> PIONEER AVIC-X1R istalation £300
(Message started by: trebor on Nov 6th, 2006, 9:00pm)

Title: PIONEER AVIC-X1R istalation £300
Post by trebor on Nov 6th, 2006, 9:00pm
Hello Lads can anyone help with pioneer sat nav istalation into scorp, Local car audio specialists want to charge me £300.

Title: Re: PIONEER AVIC-X1R istalation £300
Post by Kjetil S on Nov 6th, 2006, 9:38pm
What is the problem?

£300 is WAY too much!

Title: Re: PIONEER AVIC-X1R istalation £300
Post by trebor on Nov 6th, 2006, 10:00pm
Pioneer is to replace 7000 in 1999 2.3.
were do i start,  is there room for aux hidden box behind the dash. They said not
do i bypass amp .
were do i pick up the hand brake  posotive.
reversing light ?
These are all words that Laurel and Hardy asked me in the shop.
Trouble is i dont know ?

Title: Re: PIONEER AVIC-X1R istalation £300
Post by Kjetil S on Nov 6th, 2006, 10:38pm
There might be room for the aux box somewhere near the steering wheel (below it). If the pioneer headunit is a 1U unit, then there might be room directly below it, as afaik the 7000 is 1.5U or 2U.

You will probably need to bypass the amp, unless the pioneer has aux outputs which you can hook up to the original amp (I KNOW I saw a howto on this somewhere). Schematics are probably found somewhere on the site.

Re the reverse signal, it should be possible to find where the wires pass the dashboard and tap into them.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.