|
||
Title: Granada 4x4 TCA's ? Post by Stixy on Aug 20th, 2010, 12:48pm Has anybody got a Granada 4x4 track control arm that they could measure for me ? I need the diamiter of the stud that goes into the "pinch" part of the hub and the distance from the center of the inner bush to the center of the stud ? Or to answer another question :) If i fit a Granada 2wd front crosmember and anti roll bar to my Scorpio will the 4x4 tca's fit the Scorpio hubs ? Thanks :) |
||
Title: Re: Granada 4x4 TCA's ? Post by Scorpio_Mike on Aug 21st, 2010, 10:19pm I think Granada 4x4 & Sierra 4x4 TCA's are the same - I have some kicking around in the shed but it's dark at the moment and no lights - I'll try and sort one out tomorrow and measure it for you. From memory the stud - non-threaded end of the ball-joint is tapered. You might need to fit the 4x4 alloy x-member and ARB to get your front end lined up correctly. |
||
Title: Re: Granada 4x4 TCA's ? Post by Simmo on Aug 23rd, 2010, 8:00am on 08/21/10 at 22:19:10, Scorpio_Mike wrote:
Even in good daylight he may be gone some time!!. :D ;D |
||
Title: Re: Granada 4x4 TCA's ? Post by gozz on Aug 23rd, 2010, 9:57am Simmo. Don't you think you should volunteer to go in with him like we did in the Fire Brigade,attached to each other with a line incase we got lost ? ;D GOZZ. |
||
Title: Re: Granada 4x4 TCA's ? Post by Simmo on Aug 23rd, 2010, 11:17am Believe me that could happen!!. That's after you've actually located the shed!!. ;D |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |