Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Code 03 in display
        
(Message started by: davec on Mar 31^st, 2004, 8:53am)

Title: Code 03 in display
Post by davec on Mar 31^st, 2004, 8:53am

I know this has been covered before but I can't find the entries - search finds no matches and the mentions I can find are too old and won't display. Deleted from the board I guess.
I have 03 flashing in the passengers temp display. I believe there is a TSB that covers this. Can anyone help me with this please? Is it a problem that I need to fix or can I just ignore it for now.
Thanks for any info you can give
DaveC

Scorpio Ultima 16v 2L 1996

Title: Re: Code 03 in display
Post by Dave Boulton on Mar 31^st, 2004, 10:17am

Dave,

It's at the end of http://www.fordscorpio.co.uk/aircon.htm - was reading it the other day so knew I'd seen it somewhere too.

Cheers,
Dave

Title: Re: Code 03 in display
Post by davec on Mar 31^st, 2004, 2:10pm

Thanks for the reply Dave ...unfortunately that's where I got the original info from. Curses!
Does anyone know what the TSB actually says. There is, apparently, a fix on certain models. Do I need to change the sensor? Reset the system? change the ac module? Ignore the whole thing?
Does anyone have a link to TSB 209/1995 or 10/1995 please?
Thanks
DaveC

Title: Re: Code 03 in display
Post by fixmyford on Mar 31^st, 2004, 6:09pm

Hi Dave,

New to the site but have the info you are after.....

If a concern arises over continual flashing of 'fault code 03' on the air conditioning system display, then a defective outside temperature sensor connected to a faulty air conditioning module may be the cause. In this case the module and outside temperature sensor must be renewed . Old parts (Module Part Numbers: 95GG—18C612—CC and —CD; Sensor Part Numbers: 95GW—19E642—AA) must not be installed, and must be scrapped.

Further info available as required

All the best
fixmyford.co.uk

Title: Re: Code 03 in display
Post by davec on Apr 1^st, 2004, 7:48am

Thanks for that info. Don't know what to do about it yet. I'll have to see the price of the sensor and module and how difficult they are to replace.
DaveC