Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> Problems >> gear box oil change
(Message started by: ric147 on Apr 24th, 2004, 7:57am)

Title: gear box oil change
Post by ric147 on Apr 24th, 2004, 7:57am
hi there everyone, could anyone give me a guide through changing the gear box oil on my 12 valve ultima and if this is possible for the diy machanic with a bit of experience. thanks guys richard.
P.S. if so what type of oil is to be used, dex 2 or 3.

Title: Re: gear box oil change
Post by Badboytunes on Apr 24th, 2004, 8:55am
Im assuming your scorp is auto???  if so then ford recommend dex3. I had sum work done on my auto box and that is what was used to refill mine. Hope this helps.

Cheers Nick ;)

Title: Re: gear box oil change
Post by Mick Saunders on Apr 24th, 2004, 9:45am
:)Hi,
       Would advise changing the Pancake filter as well. Thats behind the G/box bottom plate. Messy but worth it . I did my 12 valve last summer.  I Can't remember the part number, but the cost was about £15 from Fords.
Also the design has changed, and its' plastic now instead of the origional metal. Also while the plate was off I cleaned it off & checked the magnet on it for metal fragments, ( indicative of bearing break up/ cog teeth fretting ).
Mick.

Title: Re: gear box oil change
Post by ric147 on Apr 25th, 2004, 10:24am
thanks for the advice will check next weekend thanks richard.



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.