Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> Engine Bay Bulkhead removal
        
(Message started by: TaperOne on May 18^th, 2004, 9:27am)

Title: Engine Bay Bulkhead removal
Post by TaperOne on May 18^th, 2004, 9:27am

HI,

Does anyone know if the bulkhead imediately behind the engine can be removed? I can see a couple of fixings on the drivers side but nothing anywhere else.

Many thanks

TaperOne

Title: Re: Engine Bay Bulkhead removal
Post by Snoopy on May 18^th, 2004, 8:44pm

The part infront of the battery just lifts out after you remove the rubber strip to allow easy removal of the battery....... so the rest of it probably unbolts as well

HTH
Snoopy

Title: Re: Engine Bay Bulkhead removal
Post by TaperOne on May 19^th, 2004, 12:12am

HI Snoopy,

Thanks for the reply.

I hear what you are saying. I thought the same too. But I cant find where it fixes. What worries me is the page on this website showing a Dutch man, I think, cutting the Blower housing in half to service his fan motor. Seems a bit drastic to me. Surely removing the bulkhead would give enough access to remove the unit in one piece, I don't know. All I do know is I wouild like to get my hands on a Frod W/S manual. All problems solved.

And I still have the coolant leak!

Rats!

Cheers

TaperOne

Title: Re: Engine Bay Bulkhead removal
Post by Goldwinger on May 20^th, 2004, 1:30pm

b****r I have just replaced my battery it would have been easy if I had known that the bulkhead came out

Title: Re: Engine Bay Bulkhead removal
Post by Eddie on May 21^st, 2004, 2:25pm