Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> 2.3 Engine Bay Wiring Loom
        
(Message started by: Fitzy on Sep 15^th, 2004, 10:26pm)

Title: 2.3 Engine Bay Wiring Loom
Post by Fitzy on Sep 15^th, 2004, 10:26pm

After removing my old inlet manifold i noticed that due to my water leek and 7 yrs of heat oil and grime some of the wiring loom had lost its plastic covering and left some bare wires, iknow that certain parts of the engine bay loom can be replaced because some members have had to do this where it has been damaged near the spark plugs under that cover.

So i was hoping someone might be able to let me have the finis number and rough idea on how much it costs and where the loom in question starts because i have traced all the wires back to a fairly big square box mounted on the drivers side wing with a nut on top, is this some sort of connection block or something?

Thanx for the help guys.

Fitzy ;) ;D ;)

p.s. car is a 2.3 1997 P reg Ultima Estate.

Title: Re: 2.3 Engine Bay Wiring Loom
Post by stan on Sep 15^th, 2004, 11:01pm

hi.paid £103.10 in total for fuel cut of loom .loom starts at the block you found on drivers side.finis no depends on vin identification.you could pm me with your info and i will send back the finis code or ask one of the other members you trust.hth stan