Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> injector wiring
        
(Message started by: rickyfifer on Nov 26^th, 2004, 5:18pm)

Title: injector wiring
Post by rickyfifer on Nov 26^th, 2004, 5:18pm

hi ta to howiedintheplace for sending me a pic of the ford tool i needed to get my crankshaft pulley off i couldnt get it anywhere but a draper 2 legged puller part # 13907 or n130 [4 inch puller] did the trick if anyone needs to get it off without the proper remover , anyway my next job after putting my timing chains in is to do the loom between the v as its falling apart(a 95 24v scorpio)the problem i have is all the ford lables have fell off the injector cables apart from no 3 which is brwn/blue and black/blue is anyone out there that can help me with the colours for the other 5 cylinders or know a easy way of finding them that would be ace

richard

Title: Re: injector wiring
Post by colinw on Nov 26^th, 2004, 6:44pm

check out the wiring diagrams on the main site you should find all you need on there if not contact me off list

Title: Re: injector wiring (ta colin)
Post by rickyfifer on Nov 30^th, 2004, 1:07pm

thanks the info you gave me came in useful and sorted out the problem didnt know there was a wiring page in there too cheers.

richard