|
||
Title: 2.0ltr Ultima Engine hunting then missfires Post by bobtilt on Jan 3rd, 2005, 10:52am Engine has started hunting from 500rpm to 2000rpm, then it starts to missfire? After reving it a short while it seems to clear! All i found was the fusebox was wet, but after drying it out everything is still the same1 Any clues plz |
||
Title: Re: 2.0ltr Ultima Engine hunting then missfires Post by waders on Jan 3rd, 2005, 11:27am Hi, Try lightly sanding all the blades of fuses and relays. If they are slightly corroded, just drying out the fuse box may not be enough to get good connections. Good luck ;) Waders. |
||
Title: Re: 2.0ltr Ultima Engine hunting then missfires Post by Eddie on Jan 3rd, 2005, 3:56pm A 2.0L 16v. First off,remove the top/ignition cover (the steel blue plate on top of the engine) and check the wiring for shorts. The loom in the engine is very prone to breaking down. Second remove and clean the idle control valve. Hope this helps. eddie |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |