|
||
Title: INHIBITOR SWITCH Post by RON on Jan 24th, 2005, 5:17pm Hi ya All, Just had a guy round to look at my 2.0 ultima 95 16v, regarding yesterdays problem, ENGINE WON'T START, the guy said it is a faulty inhibitor switch, could anyone let me know where this is found, and could i fix this myself, or is it a garage job? cheers Ron |
||
Title: Re: INHIBITOR SWITCH Post by bazw on Jan 24th, 2005, 7:05pm i would think its the inhibitor switch its on the side of the box and is prob not on right its on the left hand side near the front it may have been knocked loose when they worked on the box other option is that the starter lead has been knocked off the starter solenoid |
||
Title: Re: INHIBITOR SWITCH Post by RON on Jan 24th, 2005, 8:02pm Thanks Bazw, I'll have to have a look in the morning, i thought this website had some diagrams of the gearbox and pages to view the parts and wiring etc, where have they all gone, there used to be a load of tabs on the left hand side of the home page. Thanks for the advice, i'll let u know how i get on. I've just been out to the car again, and it didn't start, i wiggled the gear stick, and put it in to neutral and she started, something a bit iffy somewhere !!! ??? |
||
Title: Re: INHIBITOR SWITCH Post by ren on Jan 24th, 2005, 8:51pm Ron If you go to the main page an scroll down to the bottom an use the search option for the pages u want. hth Ren |
||
Title: Re: INHIBITOR SWITCH Post by RON on Jan 24th, 2005, 9:19pm Cheers Ren, I'll have a go. Ron |
||
Title: Re: INHIBITOR SWITCH Post by SaveTheNight on Jan 24th, 2005, 9:23pm here you go Ron ... http://www.fordscorpio.co.uk/autoselector.jpg |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |