Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Problems >> MAF - help needed!
        
(Message started by: OHC on May 3rd, 2005, 11:56am)
Title: MAF - help needed!
Post by OHC on May 3rd, 2005, 11:56am
Hallo!

I' d like to check the MAF and HO2S output, but I have no OBD lead. I know that it's possible to read the signal by multimeter but I don't know what contacts I should apply multimeter's probes to! Yes, I saw 'troubleshooting' section in HO2S and MAF data page. I'm not a car electrician so it helps but not so much!  

Please, that pins of MAF plug should I apply positive and negative multimeter's probe to measure return signal!
Please, also explain the same about HO2S11!

It will help me so much!

Best regards and thanks in adv.

OHC
Title: Re: MAF - help needed!
Post by Eric_R on May 3rd, 2005, 7:32pm
OHC,
See the answer in the OBD forum.


Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.